Rock, Another thought... You may have your static ports in a poor location and when you change flap settings and/or gear up/down/airspeed changes, etc. this can create turbulent air over these ports causing minute fluctuation in airspeed. This condition can be hard to detect but with huge confusing ...

Hello Members, I have been communicating with Capt. Augustine and Mark Hufstuttler today. Action has really ramped up at Uvalde TX. With approx 15 workers (including Augustine!) work is in progress loading up all the assets for the long move to California. So far, 10 containers are loaded with 8 mor...

I suggest you contact Kevin Risse with Risse Racing in Redmond Oregon. He rebuilds/services all these struts.

Risse Racing
530-941-1821
541-526-7242
kevin@risseracing.com


Hope this helps,

... George

Beautiful system Valin!!

Does this work on a straight Lancair IV ??

Good luck with running another batch.

Regards,

... George

Rock, Aluminum polished spinners are faily common. Not sure about chrome plated. I have the aluminum polished spinner on my turbine. If I remember correctly they were originally painted and I took them to a professional to remove the paint and then polish. You should also then have the prop balanced...

Gentlemen, I have built two Lancair 4P-T's and love them both! To date, I have approx 1200 hrs flight time between the two of them. On the first plane I installed the TKS system and it worked very well and as advertised. I belieive the TKS ice protection system is the best out there when it comes to...

Gang, I have found it hard to chase small leaks with soapy water. I suggest you remove the inside door panel so you expose tubing, pump, check valve, psi regulator and phneumatic toggle switch, etc. Then while you are inside the cabin, close the door and inflate the seal. The PSI regulator should be...

Konstantin,

Regarding nose strut service questions, I would suggest you contact Kevin Risse with Risse Racing in Redmond Oregon at ... 530-941-1821 or email: kevin@risseracing.com

... George

This is the pneumatic toggle switch I ordered. See attachment...

... George

Matt,

I also plan to be at Sun-N-Fun this April and would like to join the group.

Not sure of the timing but lets stay in touch.

... George