C-GSEM

[Maurits van Rooy]

Here is the final CAD assembly model created in Solidworks. The CAD files can now be sent of for manufacturing.

IMG_3436.jpeg (382.58 KiB) Viewed 58 times

[Maurits van Rooy]

More of the CAD rendering.

a3af1c60-3a23-4ea4-9d91-7c9174b2e87f.jpeg (72.46 KiB) Viewed 57 times

41948b1e-6ad5-4d54-8b71-dbdd2760f99b.jpeg (59.55 KiB) Viewed 57 times

The main switch panel and CB panel will have LED backlighting controlled by PWM 12 Volt controller. These panels are custom made for this project.

[Maurits van Rooy]

In the mean time while the panels are being manufactured the harness is manufactured separately first on a harness board and then on a table by the harness fabricator. The harness is built with the use of the CAD data during the design phase.

IMG_3434.jpeg (1.69 MiB) Viewed 56 times

IMG_3439.jpeg (1.67 MiB) Viewed 56 times

This is the complete integration harness for the G3x stuff.it is about ready to come of the board and connectors added at termination points.

[Maurits van Rooy]

Panel and rack parts have arrived from manufacturing and the panel assembly phase is started.

IMG_3441.jpeg (632.77 KiB) Viewed 55 times

IMG_3442.jpeg (652.9 KiB) Viewed 55 times

IMG_3443.jpeg (1.23 MiB) Viewed 55 times

IMG_3444.jpeg (449.59 KiB) Viewed 55 times

IMG_3445.jpeg (818.49 KiB) Viewed 55 times

IMG_3446.jpeg (1.38 MiB) Viewed 55 times