N994PT (IVPT) in extensive rebuild now.

Want to show off your work, or document a build? Post here.

Moderators: George Wehrung, Admin

Post Reply
Tom Sullivan
Posts: 80
Joined: Mon Nov 28, 2022 2:33 pm

Wow, cool story Rock!!
Top
Tom Sullivan
Posts: 80
Joined: Mon Nov 28, 2022 2:33 pm

I headed back to Florida yesterday (driving, argh) to bring my ‘63 Chevy Impala SS and Harley back for the summer. This last session back home we were able to complete a LOT OF WORK on the project. The last challenge was completing all repairs to the belly tank from the “no gear” rough terrain landing. I had 3 penetrations into the tank and one spot with enough evidence of damage I had to open it up and inspect it (ended up being fine). Two of those repairs were fairly extensive, with one requiring repairs to the fuselage below the wing fairing attachments.

I ended up making a Styrofoam MOLD to reproduce the destroyed lower front area of the wing fairing, which ends up being part of the sealed area of the belly tank. It turned out great. This past Monday we closed out the last two large repairs, after extensive cleaning of the belly tank using various toolls, mirrors, flashlights, and a borescope.

I also repaired the bulk of the wing fairing, performed micro bodywork on my intake transitions for smooth air flow into the intake plenum. We fitted one gear door and are ready to fit the other one. When I get back to Michigan my next project will be leak testing the tank.
Attachments
Mold complete for reconstruction of wing fairing / belly tank sealing surface
Mold complete for reconstruction of wing fairing / belly tank sealing surface
IMG_3619.jpeg (4.07 MiB) Viewed 2412 times
Shot bags applying pressure on wet layup of wing fairing reconstruction
Shot bags applying pressure on wet layup of wing fairing reconstruction
IMG_3621.jpeg (3.76 MiB) Viewed 2412 times
Aft area belly tank repair all tank sealed
Aft area belly tank repair all tank sealed
IMG_3632.jpeg (3.33 MiB) Viewed 2412 times
Front belly tank repair with flox dam to support close out panel
Front belly tank repair with flox dam to support close out panel
IMG_3633.jpeg (3.3 MiB) Viewed 2412 times
Front belly tank repair fuel tank sealed
Front belly tank repair fuel tank sealed
IMG_3634.jpeg (4.13 MiB) Viewed 2412 times
Aft belly tank repair close out installation with Hysol
Aft belly tank repair close out installation with Hysol
IMG_3636.jpeg (4.09 MiB) Viewed 2412 times
Aft belly tank repair sanded out
Aft belly tank repair sanded out
IMG_3639.jpeg (3.54 MiB) Viewed 2412 times
Front belly tank repair closed out
Front belly tank repair closed out
IMG_3637.jpeg (4.45 MiB) Viewed 2412 times
View of wing fairing reconstruction
View of wing fairing reconstruction
IMG_3638.jpeg (4.07 MiB) Viewed 2412 times
Top
George Wehrung
Posts: 213
Joined: Tue Nov 22, 2022 3:56 pm
Location: KMRH

That’s quite the extensive work!!!

Did you drive the lizard back down to Florida?


Sent from my iPhone using Tapatalk
Top
Tom Sullivan
Posts: 80
Joined: Mon Nov 28, 2022 2:33 pm

I drove my truck down this trip to pick up my ‘63 Impala, my Harley, and Joe Trepicone’s engine in Deland.

As far as “the lizard”, I think you’re referring to Rock’s encounter with one in his IVPT. That wasn’t me.

Tom
Top
George Wehrung
Posts: 213
Joined: Tue Nov 22, 2022 3:56 pm
Location: KMRH

Sorry. I guess I got the posts missed up


Sent from my iPhone using Tapatalk
Top
User avatar
Ryan Riley
Posts: 130
Joined: Tue Nov 22, 2022 4:59 am
Location: Phoenix

Lots of work, but looking like great progress.
-Ryan
Lancair ES Instructor
LOBO Webmaster
2007 Lancair ES
Top
Tom Sullivan
Posts: 80
Joined: Mon Nov 28, 2022 2:33 pm

My New Engine for the airplane rebuild saw it's first run by Quentin Cook on Friday, June 7th. Quentin commented it was a VERY STRONG engine, seeing really high torque without hitting max ITT !!! Hopefully it makes for a FAST IVPT !!



Tom
Top
Post Reply

Return to “Build Status Posts”